CONTACT RATINGS
Application
| Contact Arrangement | 1H, 1D, 1Z |
| Contact Resistance | ≤ 100mΩ (1A 24VDC) |
| Contact Material | Silver Alloy |
| Contact Rating(Resistive) | 5A 28VDC; 10A 250VAC |
| Max. Switching Voltage | 277VAC/28VDC |
| Max. Switching Current | 10A |
| Max. Switching Power | 2770VA/140W |
| Mechanical Life | 1×10 7 operations |
| Electrical Life | 1×105 operations |
Features
·Highly reliable, low cost ·Miniature size & large switch capacity up to 10A · High dielectric strength type · Fully Sealed
COIL DATA
360mW| Nominal VDC | Pick-up Voltage (Max.) VDC | Drop-out Voltage (Min.) VDC | *Max. Allowable VDC | Coil Resistance Ω± 10% |
| 3 | 2.25 | 0.3 | 3.9 | 25 |
| 5 | 3.75 | 0.5 | 6.5 | 70 |
| 6 | 4.50 | 0.6 | 7.8 | 100 |
| 9 | 6.75 | 0.9 | 1 1.7 | 220 |
| 12 | 9.00 | 1.2 | 15.6 | 400 |
| 18 | 13.5 | 1.8 | 23.4 | 900 |
| 24 | 18.0 | 2.4 | 31.2 | 1600 |
| 48 | 36.0 | 4.8 | 62.4 | 6400 |
CHARACTERISTICS
| Insulation Resistance | 1000MΩ (at 500VDC) | |
| Dielectric Strength | Between coil & contacts | 1500VAC 1min |
| Between open contacts | 1min | |
| Operate time (at nomi. volt.) | ≤8ms | |
| Release time (at nomi. volt.) | ≤5ms | |
| Humidity | 45% ~ 85% RH | |
| Storage Condition | -55°C~+85°C | |
| Operating Condition | -55°C~+70°C | |
| UL Class F | Insulation System Class F | |
| Shock Resistance | Functional | 98m/s2 |
| Destructive | 980m/s2 | |
| Vibration resistance | 10Hz to 55Hz 1.5mm DA | |
| Unit weight | Approx. 12g | |
| Construction | Sealed Type, Dust Cover Type, Flux Tight Type | |
| Nominal VDC | Pick-up Voltage (Max.) VDC | Drop-out Voltage (Min.) VDC | *Max. Allowable VDC | Coil Resistance Ω± 10% |
| 3 | 2.25 | 0.3 | 3.9 | 20 |
| 5 | 3.75 | 0.5 | 6.5 | 55 |
| 6 | 4.50 | 0.6 | 7.8 | 80 |
| 9 | 6.75 | 0.9 | 1 1.7 | 180 |
| 12 | 9.00 | 1.2 | 15.6 | 320 |
| 18 | 13.5 | 1.8 | 23.4 | 720 |
| 24 | 18.0 | 2.4 | 31.2 | 1280 |
| 48 | 36.0 | 4.8 | 62.4 | 5120 |
ORDERING INFORMATION
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
COIL
| Coil Power | 360mW 450mW |
Remark:1) In case of no tolerance shown in outline dimension: outline dimension ≤ 1mm,tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. This datasheet is for customers' reference. All the specifications are subject to change without notice.Notes: 1 . PC board assembled with dust cover type and flux tight type relays can not be washed and/or coated. 2. Dust cover type and flux tight type relays can not be used in the environment with dust, or H 
CHARACTERISTIC CURVES
